User Guide

Everything you need to know about your AutoScooper 12.

Contents

Click a section below to jump to instructions.

01Safety notes
02Components
03Overview
04Installation
05How to use
06Maintenance
07Specs
08Warranty

1. User safety notes

Electrical Safety Warning

To reduce the risk of electric shock, always unplug before cleaning or servicing. For indoor household use only.

> 3 lbs Minimum Weight
> 6 Months Minimum Age
Switching to Manual Mode
1

Recommended if your cat is under 3 lbs, younger than 6 months, pregnant, or nursing.

2

Press and hold the “Clean” button for 5 seconds until you hear a beep.

3

The Manual Mode Indicator will light up once successfully enabled.

Placement

Place on a flat, stable indoor surface. Avoid soft flooring or direct sunlight.

Supervision

Children must only use this product under strict adult supervision.

Power Safety

Keep the plug clean. Never plug or unplug the machine with wet hands.

2. Components & Accessories

Product Components Overview
NOTE: Before you start setting up, make sure you have all the accessories included.
Main Unit1 Unit
Waste Bin1 Unit
Support Legs4 PCS
Entry Step1 Unit
Adapter1 Unit
Liners1 Roll (20)
User Manual1 Unit
Quick Guide1 Unit

3. Product Overview

Main Structure

Main Structure
Litter Chamber Rotating Drum
Waste Container Sealed Bin
Support Legs Stable Base
Control Buttons User Interface
Base Unit Precision Sensors

Control Panel & Indicators

Control Panel Indicators
Button Functions

On/Off: Long press to power the unit. Clean: Short press to start an immediate cleaning cycle. Litter Added: Press after adding litter to reset weight sensors.

Status Indicators

Standby: Ready for operation. Manual Mode: Child lock or manual override active. Cleaning: Light stays on during the rotation cycle.

Alert Indicator

A flashing or steady red light indicates the waste bin is full or the safety sensors have been triggered. Please inspect the device.

4. Installation

4.1 Installing Support Legs

Installation Step 1
1
Take the machine out of its packaging and place it on the included PE bag. One by one, insert the 4 support legs into the circular holes at the machine's bottom.
Installation Step 2
2
After all 4 legs are securely in place, stand the machine upright on a flat and stable surface.

4.2 Installing Waste Container

Open retainer ring
1
Open the retainer ring on the waste container.
Fit the liner
2
Fit the liner over the container and tuck edges underneath the retainer ring.
Close and press
3
Close the ring, then press the liner down by hand to clear the infrared sensor.
Front entry step
4
Install the front entry step (optional, based on your cat's needs).
Slide into place
5
Finally, slide the waste container along the bottom track until it locks securely.

4.3 Placing the Machine

Place the machine in a roomy indoor area, take out the power adapter, and insert it into the power port.

Correct Moving Method
When moving it, hold the bottom edge of the base unit instead.
CORRECT DEMONSTRATION
Incorrect Moving Method
Do not lift by gripping the joint covers or by directly dragging the machine.
INCORRECT DEMONSTRATION
Tip: Set up the machine where the previous litter box was, or nearby, making sure it stays indoors.

4.4 Pouring Cat Litter

Alignment
1
Press the “Power On” button to turn on the machine. The device will automatically align the litter chamber (approx. 2 minutes).
Add Litter
2
Add cat litter to the litter bed, ensuring the level is between MIN and MAX scale lines. Ideally, fill it to the MAX line.
NOTICE: Use clumping cat litter (mineral or bentonite clay) with small pieces.
Leveling
3
After adding cat litter, press the "Litter Added" button to level the litter surface.
NOTICE: Not suitable for long-strip tofu or crystal cat litter.

5. How to Use

5.1 Introducing Your Cat

Step 1: Transition

Day 1-6: Mix old and new litter in equal measure to help your cat adjust to the new environment.

Step 2: Acclimation

For timid cats, start with manual cleaning. Switch to Auto Mode once they are fully comfortable.

Step 3: Alignment

After power on, wait 2 min for alignment. Do not press buttons until it defaults to "Auto Mode".

5.2 10-Minute Cleaning Cycle

Designed for a Deep Clean

You don’t have to do anything - just watch it clean for you. (Step 1 — Cat leaves the unit).

2 Minutes
Phase 01
2 Minutes

The device prepares for the cycle immediately after your cat safely exits.

5 Minutes
Phase 02
5 Minutes

Clumping Time: Allows better clumping, less sticking to the bed, and easier waste removal.

3 Minutes
Phase 03
3 Minutes

The final 3-minute rotation cycle to scoop and store waste into the sealed container.

6. Cleaning and Maintenance

6.1 Maintaining the Waste Container

Maintenance View
Every 5-7 Days

Empty Waste Container

Recommended to empty every 5 days (max 7) to prevent odors and the breeding of pests. Actual duration should be tested for specific situations.

Every 15 Days

Deep Clean the Bin

Wash the container every 15 days. Regular cleaning prevents residual waste from retaining odors in the bin's material.

Once a Month

Total Machine Refresh

Empty all cat litter and clean both the litter chamber and the waste container. This effectively reduces odor accumulation in the system.

6.2 Cleaning the Litter Chamber

Step 1
1 Remove & Empty

Slide the latch to open the cover, lift out the litter chamber, and empty all remaining cat litter.

Step 2
2 Remove Litter Bed

Separate and remove the litter bed from the litter chamber for thorough cleaning.

Step 3
3 Wash & Rinse

You may rinse both the chamber and the litter bed with water, or clean them using a soft brush.

Step 4
4 Air Dry Correctly

Place the chamber with the opening facing up in a well-ventilated dry area to air dry completely.

Important: Do not air dry with the opening facing down as it impedes internal drying.

7. Product Specifications

Product Dimensions
Product Model AS12
Product Name Self-Cleaning Cat Litter Box
Power Consumption 24W
Rated Voltage DC 12V 2A
Max Litter Capacity 5.5L / 1.5Gal
Waste Container Volume 8L / 2.2Gal
Entrance Height 12.4 inch / 31.5 cm
Noise Level 38 - 40dB

8. Warranty & Compliance

The warranty period is 12 months from the date of product receipt. The warranty is limited to free repair of the purchased product; consumables and accessories are not covered.
If the product malfunctions during normal use within the warranty period, it can be repaired for free. If repair is not possible, a replacement service will be provided.
Even within the warranty period, a paid repair will be required for:
Incorrect use or deliberate actions.
Damage caused by transportation companies.
Damage caused by pets (e.g., biting or urinating on the adapter).
Natural disasters (fire, earthquake, etc.).
Beyond general household use (e.g., outdoor use).
Repair will be refused regardless of status for:
Products not purchased through official Petpivot channels.
Unauthorized disassembly or modification.
Consumables and accessories.
For non-warranty repairs, shipping and handling charges will apply.
Replacement products follow the warranty period of the original purchase date.
Repair or replacement services are only valid in certain countries/regions.
If you need repair services, please contact us via your purchase channel or email: support@petpivot.com.
Petpivot covers shipping for warranty repairs; however, packaging materials are not included.
Petpivot reserves the right to interpret and update these terms. Requests will be processed according to the latest terms.
FCC Warning & Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device. To maintain compliance with RF exposure guidelines, a distance of at least 20 cm must be maintained between the radiator and your body.
WEEE Notice (European Directive 2012/19/EU)
Old electrical and electronic devices must be separated from normal household waste and disposed of at designated state facilities. Correct disposal prevents environmental pollution and potential human health hazards. For proper disposal information, contact your local authorities or the shop of purchase.
TOP