Autoscooper Safety System™

Built for protection. Designed for peace of mind.

Every Autoscooper is built on a four-layer safety architecture combining active monitoring and structural safeguards into one unified system.

Because real safety never relies on a single mechanism.

It works — every single cycle.

Experience Autoscooper 12

Layer 1 — 360° Presence Detection

Always watching. Always aware.

Full-Surround Infrared Coverage

Full-Surround Infrared Coverage

Multi-infrared sensors surround the entrance and interior, creating a continuous safety field around your cat.

Interior Motion Monitoring

Interior Motion Monitoring

Inside the chamber, presence is constantly monitored before every cycle begins.Cleaning only starts when the space is completely clear.

Instant Entrance Pause

Instant Entrance Pause

If your cat approaches, re-enters, or lingers near the opening, movement pauses immediately.

Layer 2 — Active Mechanical Anti-Pinch

Layer 2 — Active Mechanical Anti-Pinch

Stops before contact. Physically safeguarded. During rotation, motion is continuously monitored. If your cat approaches or resistance is sensed, movement stops instantly. A mechanical limiter maintains a safe gap at the entrance — ensuring protection at the structural level.

Layer 3 — Mechanical Limitation Safeguard

Layer 4 — Precision Position Monitoring

Layer 4 — Precision Position Monitoring

Integrated Hall sensors track drum position in real time, ensuring controlled alignment and accurate stopping after every cycle.

Your Safety Questions, Answered

Autoscooper’s safety architecture does not rely on a single sensor.

In addition to infrared monitoring, the system includes active anti-pinch response and a mechanical rotation limiter. Even in the unlikely event of sensor disruption, structural safeguards remain in place.

Safety is layered — not singular.

No.

Cleaning cycles only begin after presence detection confirms the interior space is clear. If your cat re-enters or lingers near the entrance, rotation pauses immediately.

The system prioritizes awareness before motion.

Yes.

Continuous presence monitoring and immediate motion halt prevent rotation when movement is detected. The system is designed to respond to even small positional changes near the entrance or inside the chamber.

If re-entry is detected, the drum stops instantly.

Rotation will only resume once departure is confirmed and the space is fully clear.

No.

Autoscooper integrates both electronic monitoring and mechanical safeguards — including a physical rotation limiter — ensuring protection at multiple levels.